Al Jurf Industrial Area, Ajman, UAE
MINREX is Kwality's mineral base industrial oil range — blended with 100% virgin base oils and a balanced anti-wear additive system at our plant in Al Jurf Industrial Area, Ajman, UAE. Built for hydraulic systems, gear drives, compressors and circulating circuits that run continuously under heat and load.
MINREX is a mineral base industrial oil range manufactured by Kwality Lubricants and Grease Manufacturing at our plant in Al Jurf Industrial Area, Ajman, UAE. Every grade is blended, filled and batch-tested on site — it is not an imported finished product traded under our name.
The range spans seven oils — hydraulic, compressor, circulating, gear, cutting, turbine and heat transfer — covering the viscosities used across industry, from ISO VG 10 through 680, and formulated with an anti-wear, anti-oxidant additive package for film strength, water separation, air release and clean operation at high ambient temperatures.
Because we manufacture in Ajman, we can supply consistent batches in pails, drums, IBCs and bulk, and support private label and toll blending programs for distributors and brand owners across the GCC, Africa and Asia.
Hydraulic, compressor, circulating, gear, cutting, turbine and heat transfer — ISO VG 10 through 680.
No recycled or re-refined base stocks — consistent, predictable quality.
Blended, filled and batch-tested at our Ajman plant under ISO systems.
ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018 certified operations.
Seven mineral base industrial oils covering every duty in the plant — hydraulic, gear, compressor, circulating, turbine, cutting and heat transfer. Each is offered in the ISO viscosity grades below, blended and filled in Ajman, UAE.
Hydraulic Oil is our fastest-moving grade
Anti-wear mineral hydraulic oil for high-pressure systems, pumps, valves and rams. Fast air release, quick water separation and a strong anti-wear film keep pressure steady and components protected through continuous plant duty.
Most requested grade: ISO VG 46
Mineral compressor lubricant for reciprocating and rotary units. Low deposit and varnish formation, good oxidation resistance and dependable air-end protection when discharge temperatures run hot and duty cycles never stop.
Most requested grade: ISO VG 46
Rust and oxidation inhibited mineral circulating oil for lubrication systems, bearing housings and machine tool circuits. Built for the long haul — the same charge stays in service for extended periods with stable viscosity and clean internals.
Most requested grade: ISO VG 68
Mineral base EP gear oil for enclosed gearboxes, reducers, agitators and drives. Resists micro-pitting and scuffing, carries heavy loads and keeps bearings clean through shock-loaded, continuous industrial duty.
Most requested grade: ISO VG 220
Mineral neat and soluble cutting fluids for turning, milling, drilling and grinding. Strong cooling, clean surface finish, rancidity control and operator-friendly formulations that keep tool life long and swarf clean.
Most requested grade: SOLUBLE
Mineral based heat transfer fluid for closed-loop systems. Low volatility, high thermal stability and minimal coking for consistent performance in process heating circuits.
Most requested grade: ISO VG 32
Rust and oxidation inhibited turbine oil with excellent demulsibility and rapid air release. For steam and gas turbines, hydraulic power units and long-life circulating systems that run continuously for years between changes.
Most requested grade: ISO VG 32
Need a data sheet for a specific grade, or a viscosity not listed here?
Request SpecificationsOur seven mineral base oils cover the whole plant. Here's where each MINREX grade earns its keep — from hydraulic packs and gearboxes to compressors, circulating systems, machine tools, heat transfer circuits and turbines.
High-pressure pumps, valves, rams, presses and mobile hydraulics — ISO VG 10 through 150.
Enclosed gearboxes, reducers and agitators carrying heavy, shock loads — ISO VG 68 to 680.
Reciprocating and rotary air compressors running hot, long duty cycles — ISO VG 32 to 150.
Lubrication systems, bearing housings and machine tool circuits on long service charges — ISO VG 46 to 150.
Turning, milling, drilling and grinding — neat and soluble metalworking fluids.
Closed-loop process heating circuits needing low volatility and high thermal stability.
Steam and gas turbines, hydraulic power units and long-life circulating systems — ISO VG 32 to 100.
A grade or viscosity not listed? We'll blend and fill to your spec in Ajman, UAE.
Made in the UAE for UAE conditions — high ambient heat, dusty air and continuous duty cycles. MINREX holds viscosity, film strength and oil pressure where thinner, lighter fluids can struggle.
Seven mineral base industrial oils — hydraulic, compressor, circulating, gear, cutting, turbine and heat transfer — offered in the ISO viscosity grades below, in the pack formats your market needs. Technical Data Sheets and Safety Data Sheets are available on request.
Want the MINREX mineral base industrial oil range under your own brand? We offer private label and toll blending from our Ajman plant.
Learn moreTell us the ISO grades, volumes, pack sizes and destination market you need. We supply the MINREX mineral base industrial oil range to plants, contractors, importers and distributors — and welcome distributor enquiries for the GCC, Africa and Asia.
Tell us the grades, volumes, pack sizes and destination market you need. We supply the MINREX mineral base industrial oil range to plants, contractors, importers and distributors across the GCC, Africa and Asia.
We typically respond within 24 hours.
Take a look inside the Al Jurf plant where this oil is blended, filled and quality-tested before export.
Visit the manufacturer pageSell this same MINREX mineral base industrial oil range under your own brand, pack design and label — with flexible MOQs.
Explore private label